Notices

Shimano, Penn, Rupp Outriggers, Cannon, Riffe

Old 12-27-2008, 01:35 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Nov 2005
Location: Thibodaux, LA
Posts: 502
Default Shimano, Penn, Rupp Outriggers, Cannon, Riffe

Cleaned out the fishing room this past weekend and found quite a few items I don't use anymore.

Shimano Tekota 800
Used as Kite reel last year. Spooled with 80 pound PP, normal boat rash but works perfectly
$120 with 80 PP, $100 dollars no line






6 Shimano Tallus 7 foot kingfish/livebait rods Model # TLC - 70H The tips on these rods have been replaced with roller tips. These rods came with a set of Trinidad 40's that I bought from a friend of mine. I built a new set of rods for the trinidad's and only used a couple of these rods as spare's once or twice. They have the typical boat rash and also have my buddies name above the handle. Any rod repair shop could put your name in its place or simply remove the name. These rods are approx 5 years old. $200 for all 6






Rupp Top Gun Outriggers Brand new, 15 foot
These were an extra set that came with our old Mako, never taken out of box. All parts for assembly included $200






Penn 345 GTI's , I have three of these, 2 of them work perfectly with only some boat rash, The levelwind on the third reel gets stuck to one side every now and again. I do not think it would cost very much for anyone that works on Penn's to fix. $100 for all three




Cannon easi-troll downrigger. I won this as a prize in a local tournament. I have never used it. I think it is a floor model from a local store since it did not come with a box. It works and looks like new. $75




Suunto F-115 Compass, flush mount for dash. This compass is brand new in box. Came uninstalled when I bought the contender. I didn't need it. All original instructions, paperwork, gaskets, templets, hardware included. $100





Riffe Metal Tech #3 speargun with 3/8 inch shaft and ice pick tip with upgraded aluminum muzzle. Also comes with extra 3/8 shaft. This is a great gun that I don't use anymore. The gun has normal rash from spearfishing and the bands need to be replaced. $400




Okuma CD 90 Spinning Reel on Tsunami 7 foot 25-40 pound spinning rod. This was another prize in a local rodeo. It is spooled with 80 pound PP and works perfectly. I used it a couple times as an extra bait rod. $80 for rod/reel combo





Buyer pay's shipping, Thanks, JJ

jjtabor is offline  
Old 12-27-2008, 01:58 PM
  #2  
Senior MemberCaptains Club Member
 
Join Date: Aug 2001
Location: Baton Rouge, LA
Posts: 8,799
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

JJ--I'll take the downrigger for sure and possibly the out riggers. You ever in BR anymore? If not I'll come get it from you in T-town...

Send PM with paypal info

Ryan
MakoMyDay is offline  
Old 12-27-2008, 02:13 PM
  #3  
Admirals Club Admiral's Club Member
 
Join Date: Apr 2005
Location: Southern California and Brasil
Posts: 133
Default RE: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

Sent you a PM on the rods and reels. I will take the rods and Tekota.
offshoreman is offline  
Old 12-27-2008, 02:32 PM
  #4  
Senior MemberCaptains Club Member
 
Join Date: Oct 2007
Posts: 220
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

I would like the outriggers. Please confirm 1 1/2" and they are Collapsible. Will you do PAYPAL"?
rileysea is offline  
Old 12-27-2008, 02:42 PM
  #5  
Senior MemberCaptains Club Member
 
Join Date: Aug 2002
Location: NC
Posts: 277
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

If the outriggers are available, I'll take them

jfishnc is offline  
Old 12-27-2008, 03:42 PM
  #6  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Nov 2005
Location: Thibodaux, LA
Posts: 502
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

Rileysea responded first for the outriggers, so he has first dibs. I measured the bases and put the picture up. They look like they are 1 1/2 outside diameter. They are NOT collapsible.

If he doesn't want them jfishnc is up next and then flyingcircus. Sorry guys, just going in the order I was contacted. Riley, please let me know so I can let the other guys know.

The downrigger is sold, along with the tekota and the shimano rods. Thanks guys, JJ
jjtabor is offline  
Old 12-29-2008, 04:49 PM
  #7  
MemberCaptains Club Member
 
Join Date: Dec 2008
Location:
Posts: 56
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

put me on the list for the outriggers
wjrjr is offline  
Old 12-30-2008, 10:38 AM
  #8  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Nov 2005
Location: Thibodaux, LA
Posts: 502
Default Re: Shimano, Penn, Rupp Outriggers, Cannon, Riffe

The shimano tekota, shimano tallus rods, compass, downrigger, and outriggers are sold.

Still have the penn 345's, riffe speargun, and okuma spinning combo. Thanks, JJ
jjtabor is offline  
Old 05-06-2010, 07:58 AM
  #9  
Junior Member
 
Join Date: Aug 2009
Posts: 2
Default I want the suunto f115 compass

Originally Posted by jjtabor View Post
Cleaned out the fishing room this past weekend and found quite a few items I don't use anymore.

Shimano Tekota 800
Used as Kite reel last year. Spooled with 80 pound PP, normal boat rash but works perfectly
$120 with 80 PP, $100 dollars no line






6 Shimano Tallus 7 foot kingfish/livebait rods Model # TLC - 70H The tips on these rods have been replaced with roller tips. These rods came with a set of Trinidad 40's that I bought from a friend of mine. I built a new set of rods for the trinidad's and only used a couple of these rods as spare's once or twice. They have the typical boat rash and also have my buddies name above the handle. Any rod repair shop could put your name in its place or simply remove the name. These rods are approx 5 years old. $200 for all 6






Rupp Top Gun Outriggers Brand new, 15 foot
These were an extra set that came with our old Mako, never taken out of box. All parts for assembly included $200






Penn 345 GTI's , I have three of these, 2 of them work perfectly with only some boat rash, The levelwind on the third reel gets stuck to one side every now and again. I do not think it would cost very much for anyone that works on Penn's to fix. $100 for all three




Cannon easi-troll downrigger. I won this as a prize in a local tournament. I have never used it. I think it is a floor model from a local store since it did not come with a box. It works and looks like new. $75




Suunto F-115 Compass, flush mount for dash. This compass is brand new in box. Came uninstalled when I bought the contender. I didn't need it. All original instructions, paperwork, gaskets, templets, hardware included. $100





Riffe Metal Tech #3 speargun with 3/8 inch shaft and ice pick tip with upgraded aluminum muzzle. Also comes with extra 3/8 shaft. This is a great gun that I don't use anymore. The gun has normal rash from spearfishing and the bands need to be replaced. $400




Okuma CD 90 Spinning Reel on Tsunami 7 foot 25-40 pound spinning rod. This was another prize in a local rodeo. It is spooled with 80 pound PP and works perfectly. I used it a couple times as an extra bait rod. $80 for rod/reel combo





Buyer pay's shipping, Thanks, JJ
I'd like to buy the compass
fingerbeach is offline  
Old 05-06-2010, 08:10 AM
  #10  
Admirals ClubCaptains Club Member Admiral's Club Member
 
Join Date: Apr 2005
Location: Fort Walton Beach, FL
Posts: 957
Default

If the outrigger poles don't sell, i would really like to get these off your hands... my 15' RUPP are worn out.... thanks for your time... let me know.. Scott
navyaircrew is offline  
Old 05-11-2010, 12:43 PM
  #11  
Junior Member
 
Join Date: Aug 2009
Posts: 2
Default suunto compass

do you still have it?
fingerbeach is offline  
Old 05-11-2010, 05:14 PM
  #12  
Junior Member
 
Join Date: May 2010
Posts: 2
Default Okuma CD 90 Spinner Reel

I am interested in the Okuma CD 90 Spinner Reel - if you still have it please let me know.
Johnny 803-496-3995.

I am interested in the Okuma combo, please contact me by phone or email--- L31263@aol.com

Last edited by Rockdaddy131; 05-12-2010 at 09:52 AM.
Rockdaddy131 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread