Notices
Like Tree1Likes
  • 1 Post By FELLMarineFred

Twin Yanmar 6LPA

Old 04-12-2018, 02:20 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Dec 2011
Posts: 12
Default Twin Yanmar 6LPA

Will MOB+ work with the mechanical Diesel engines ? My setup is twin Yanmar 6LP, start and stop through keys (no kill switch).
Thanks
ckon is offline  
Old 04-14-2018, 04:18 PM
  #2  
Junior Member
 
Join Date: Apr 2018
Posts: 1
Default

Hi ckon,
Thank you for posting on our forum!

The MOB+ is plug and play with all outboard engines or other engine which has a kill switch already installed and can be wired either as a replacement or in parallel with the existing kill switch.

For engines without a kill switch already installed there are no "one way fits all" solution.

However in some cases there are still ways to connect the MOB+.

If you send an email to support@fellmarine.com with all available information on your engines we will take a deeper look into your setup and see what we can do.
FELLMarineTeam likes this.
FELLMarineFred is offline  
Old 04-20-2018, 08:01 AM
  #3  
Junior Member
 
Join Date: Apr 2018
Location: Fort Lauderdale, Florida
Posts: 28
Default

Hi ckon,

Not sure if you are able to see the reply from FELLMarineFred or not. We noticed that when you created this thread, others were not allowed to post replies or new posts. The thread is now open for other post/replies. Anyway, below is a copy of FELLMarineFreds reply to your question, posted 04-14-2018:

"Hi ckon,
Thank you for posting on our forum!

The MOB+ is plug and play with all outboard engines or other engine which has a kill switch already installed and can be wired either as a replacement or in parallel with the existing kill switch.

For engines without a kill switch already installed there are no "one way fits all" solution.

However in some cases there are still ways to connect the MOB+.

If you send an email to support@fellmarine.com with all available information on your engines we will take a deeper look into your setup and see what we can do. "
FELLMarineTeam is offline  
Old 04-20-2018, 11:42 PM
  #4  
Junior Member
Thread Starter
 
Join Date: Dec 2011
Posts: 12
Default

No response yet.
ckon is offline  
Old 04-21-2018, 01:05 AM
  #5  
Junior Member
 
Join Date: Apr 2018
Location: Fort Lauderdale, Florida
Posts: 28
Default

Hi ckon,

Not sure if you are able to see the reply from FELLMarineFred or not. We noticed that when you created this thread, others were not allowed to post replies or new posts. The thread should now open for other post/replies. Anyway, below is a copy of FELLMarineFreds reply to your question, posted 04-14-2018:

"Hi ckon,
Thank you for posting on our forum!

The MOB+ is plug and play with all outboard engines or other engine which has a kill switch already installed and can be wired either as a replacement or in parallel with the existing kill switch.

For engines without a kill switch already installed there are no "one way fits all" solution.

However in some cases there are still ways to connect the MOB+.

If you send an email to support@fellmarine.com with all available information on your engines we will take a deeper look into your setup and see what we can do. "
FELLMarineTeam is offline  
Old 04-21-2018, 02:17 PM
  #6  
Junior Member
Thread Starter
 
Join Date: Dec 2011
Posts: 12
Default

Thank you. Will send a mail to support.
ckon is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread