Go Back  The Hull Truth - Boating and Fishing Forum > PRODUCTS > Eastern Marine
Reload this Page > LED Backup Trailer lights - submersible?
Notices

LED Backup Trailer lights - submersible?

Reply

Old 04-11-2018, 05:21 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Dec 2001
Location: Raleigh, NC. USA
Posts: 942
Smile LED Backup Trailer lights - submersible?

Hi Chris, I am looking for some LED backup/reverse trailer lights, preferably surface mount or if flush mount, a bracket that is aluminum or SS to prevent corrosion and the light needs to be waterproof down to approx. 3' or labeled as submersible.

I have a couple of surface mounts lights now that claimed waterproof, but on second year, they are going out due to moisture inside.

Anything like this out there?

Having a hard time believing the light manufacturer's are not focusing on backup lights has they have been invaluable for me where I am on a busy road and need to backup into the driveway. Since the backup lights were installed, I get less birds flying by!
roberth is offline  
Reply With Quote
Old 04-14-2018, 11:38 AM
  #2  
Admirals Club Admiral's Club Member
 
Join Date: Apr 2017
Location: West Islip, NY
Posts: 508
Default

Originally Posted by roberth View Post
Hi Chris, I am looking for some LED backup/reverse trailer lights, preferably surface mount or if flush mount, a bracket that is aluminum or SS to prevent corrosion and the light needs to be waterproof down to approx. 3' or labeled as submersible.

I have a couple of surface mounts lights now that claimed waterproof, but on second year, they are going out due to moisture inside.

Anything like this out there?

Having a hard time believing the light manufacturer's are not focusing on backup lights has they have been invaluable for me where I am on a busy road and need to backup into the driveway. Since the backup lights were installed, I get less birds flying by!
Me and my father made an above water level trailer light system for our new boat. i can send you some pictures of what we did and more information of what is needed to do it. PM me
RYAN S. is offline  
Reply With Quote
Old 04-16-2018, 11:01 AM
  #3  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Dec 2001
Location: Raleigh, NC. USA
Posts: 942
Default

Thanks Ryan, but I can only use lights mounted on the trailer near the tail lights due to very tight tolerances when backing in gate. Literally gave only about 1" on bothside. No room for error!🤨
The only place to mount is on lower part of the trailer which goes under water.
roberth is offline  
Reply With Quote
Old 04-17-2018, 06:58 AM
  #4  
Junior Member
 
Join Date: Oct 2017
Posts: 6
Default

I made some lights that clamped to the transom of the boat that had a trailer plug to a harness in the rear. we had the same tight gate scenario
G
Glarson is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread