Notices

Sea Lion trailer parts?

Reply

Old 07-16-2012, 09:33 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Feb 2002
Location: St. Leonard, MD
Posts: 3,956
Default Sea Lion trailer parts?

I'm going through my newly acquired Sea Lion tandem roller trailer and have run across a few parts that I would like to replace. Can you please let me know if you carry these?

Galvanized sleeves that go between the supports which mount to the crossmemebers. 1/2" bolt goes through the middle and they are roughly 2-1/8" in length.




Arms that the roller assemblies mount to. Looks like the last boat that sat on this trailer got loaded a bit too hard at some point and bent three of these arms.



Thanks.

Last edited by gw204; 07-17-2012 at 05:23 AM.
gw204 is offline  
Reply With Quote
Old 07-24-2018, 11:30 AM
  #2  
Member
 
Join Date: Dec 2017
Location: Coltons Point, MD
Posts: 72
Default

Originally Posted by gw204 View Post
I'm going through my newly acquired Sea Lion tandem roller trailer and have run across a few parts that I would like to replace. Can you please let me know if you carry these?

Galvanized sleeves that go between the supports which mount to the crossmemebers. 1/2" bolt goes through the middle and they are roughly 2-1/8" in length.

Name:  photo53.jpg
Views: 115
Size:  14.0 KB


Arms that the roller assemblies mount to. Looks like the last boat that sat on this trailer got loaded a bit too hard at some point and bent three of these arms.

Name:  photo54.jpg
Views: 119
Size:  14.0 KB

Thanks.

6 years later, were you able to find the sleeves? I'm also rebuilding a Sealion trailer and need them.
Kfannin is online now  
Reply With Quote
Old 07-25-2018, 10:40 AM
  #3  
Marine Advertiser
Marine Advertiser
 
Join Date: Sep 2006
Posts: 1,139
Default

That has been quite a while ago, but if memory serves me correctly the only thing we could find was a complete kit just to get the bushing. But I honestly can't remember who they were from now. I did find this company, I would give them a call to see if they can locate that specific Sea Lion part for you.

Sea Lion Boat Trailers | Cecil Marine
EASTERNMARINE is offline  
Reply With Quote
Old 08-14-2018, 04:57 PM
  #4  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Feb 2002
Location: St. Leonard, MD
Posts: 3,956
Default

I ended up using something like these:

https://www.lowes.com/pd/LASCO-PVC-S...ipples/3381516

Just cut the threaded sections off each end and then chopped them into the length I needed. I also drilled a small hole in the center of each and pointed that hold down when I installed them so any water that collected inside could drain.
gw204 is offline  
Reply With Quote

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: