The Hull Truth - Boating and Fishing Forum

The Hull Truth - Boating and Fishing Forum (https://www.thehulltruth.com/index.php)
-   Dockside Chat (https://www.thehulltruth.com/dockside-chat-18/)
-   -   Plumbing estimate sticker shock (https://www.thehulltruth.com/dockside-chat/342624-plumbing-estimate-sticker-shock.html)

CNUMB 04-06-2011 02:26 PM


Originally Posted by tcontic (Post 3663471)
I'm remodeling a half bath in my home and need some plumbing work done:

1) Remove and Install Toilet
2) Replace toilet shutoff valve
3) Change from pedestal to wall mounted sink
a. Move two supply lines over 2 inches
b. Move drain over two inches
c. Mount sink
4) Install sink & faucet

I received three estimates, $850, $750 and $650.

It's been a while since I've done any plumbing work, do these seem reasonable?

Thanks in advance!

Well I am a plumber down here in Fl. and those prices seem fair for 2 trips. Like Ft Myers Ken said go with the middle guy, seems reasonable..

Just1more 04-06-2011 02:31 PM


Originally Posted by RI Builder (Post 3663534)
Where are you, because here, those prices would be on the low side for materials+labor.

My thoughts, exactly. :thumbsup:

Pick the one in the middle!

Chuckster 04-06-2011 09:05 PM

Like CNUMB, I'm also a plumber, and I think those are reasonable prices, especially if they include permit fees.

billinstuart 04-07-2011 05:03 AM

Reasonable to me, especially for a plumber dealing with a homeowner directly.

CLang 04-07-2011 04:05 PM

The plumber I just used for my remodel charged $95 an hour for he and a helper to move a few lines and reinstall all my fixtures. You had better make sure that the cost includes your fixtures. Its unbelievable what they charge for toilets and sinks these days. Faucets and bath tubs cost more than that. I had terrible sticker shock when looking at new things for the house. But the price on your quotes doesn't seem bad to me at all.

coddock 04-07-2011 05:36 PM


Originally Posted by RI Builder (Post 3663534)
Where are you, because here, those prices would be on the low side for materials+labor.

Yes sir...a steal with the plumbers we deal with around here!They are all $75.00-$120.00/hr and sometimes average more on a bid job when things go well.Who needs college???

sixpack324 04-07-2011 05:44 PM


Originally Posted by RI Builder (Post 3663534)
Where are you, because here, those prices would be on the low side for materials+labor.


Same here

$750.00 to rough and set........plus cost of fixture is a good rule of thumb

the good life 04-07-2011 08:49 PM

Wow, that is actually a very good estimate! You should see what my dentist is charging me this week for some crown work! :o

SHAMROCK69 04-08-2011 06:15 AM


Originally Posted by coddock (Post 3667080)
Yes sir...a steal with the plumbers we deal with around here!They are all $75.00-$120.00/hr and sometimes average more on a bid job when things go well.Who needs college???

Funny you should say that. Our country is heading towards a huge shortage of skilled trade labor's like plumbers, electricitons etc. Good money in it but our system does not push towards the trades.

2450CC 04-08-2011 07:39 AM


Originally Posted by Chuckster (Post 3665011)
Like CNUMB, I'm also a plumber, and I think those are reasonable prices, especially if they include permit fees.

I would bet anything there will be no permits pulled at those prices. When I remodeled my kitchen I didn't need to replace the plumbing but still needed to have the permit pulled etc. So all my bids were $900.00 - $1200.00 per fixture. I paid the $1200.00 because he suggested to go brand new with everything rip it all out and replace it all.. I was there walls open with full access to everything. I live in an old house 1938 so he was right spend a couple extra bucks now and go brand new top to bottom. Or save a few bucks and hope for the best. Made sense to me. Came to find out when we opened the ceiling in the basement to replace the old galvanized drain...... Guess what ? It was rotting badly at one of the T's so I would have spent the $ down the road and had a mess to clean up when it wasn't convenient. Pay now or pay later. Shite cost what it cost just pay the $ you will pay it one way or the other.

the good life 04-08-2011 09:11 AM


Originally Posted by 2450CC (Post 3668134)
I would bet anything there will be no permits pulled at those prices.

Speaking of permits..............

When my son had his front porch pillar supports replaced due to corrosion, it took two days by the contractor. He told us that if a city inspector stops by to just say we are repairing damaged items.

The same contractor is "remodeling" my GF's bathroom but did pull a permit with the city because he said he would be there for several weeks so not to take a chance.

BTW, he isn't cheap.

dahlbebop 04-08-2011 01:09 PM

Shouldn't need a permit! If your codes there are similar to here, the plumber is allowed to move things within 30 inches without a permit.

Originally Posted by 2450CC (Post 3668134)
I would bet anything there will be no permits pulled at those prices. When I remodeled my kitchen I didn't need to replace the plumbing but still needed to have the permit pulled etc. So all my bids were $900.00 - $1200.00 per fixture. I paid the $1200.00 because he suggested to go brand new with everything rip it all out and replace it all.. I was there walls open with full access to everything. I live in an old house 1938 so he was right spend a couple extra bucks now and go brand new top to bottom. Or save a few bucks and hope for the best. Made sense to me. Came to find out when we opened the ceiling in the basement to replace the old galvanized drain...... Guess what ? It was rotting badly at one of the T's so I would have spent the $ down the road and had a mess to clean up when it wasn't convenient. Pay now or pay later. Shite cost what it cost just pay the $ you will pay it one way or the other.


fishingfun 04-08-2011 01:14 PM

See plumers use to provide the crack now they bend you over and you supply the crack.

Chuckster 04-09-2011 09:54 PM


Shouldn't need a permit! If your codes there are similar to here, the plumber is allowed to move things within 30 inches without a permit.
Not in Massachusetts... you need a permit for pretty much everything.

And yes... they will catch you.

I pull permits for everything - even in my own home.

Crabpot Man 04-10-2011 04:59 AM


Originally Posted by Chuckster (Post 3671457)
Not in Massachusetts... you need a permit for pretty much everything.

And yes... they will catch you.

I pull permits for everything - even in my own home.

Revenue stream.

the good life 04-10-2011 08:40 AM


Originally Posted by Chuckster (Post 3671457)
Not in Massachusetts... you need a permit for pretty much everything.

And yes... they will catch you.

I pull permits for everything - even in my own home.

Here in So Cal, a permit is required just to change the water heater! :o

billinstuart 04-10-2011 10:20 AM


Originally Posted by the good life (Post 3671972)
Here in So Cal, a permit is required just to change the water heater! :o

Only 1? Some places require an ELECTRICAL permit also...$$$$$$$$$$$$$$

the good life 04-10-2011 08:38 PM

I wonder what's going to happen to others in the city where my GF lives? Her bathroom remodel should be complete in about two weeks or less. The city inspector who came by a couple of days ago signed off on the rough coat for the bathroom. The city is in financial trouble as the city wasn't even aware of how bad their bank accounts were! Apparently they are many millions in the hole and the inspector said his job was secure until about July.

hanson 04-11-2011 05:15 AM


Originally Posted by Mist-Rest (Post 3663928)
I wouldn't bitch.


I also don't know any poor plumbers.:grin:

Same here,Dont know any of them making under 150-200k per year that have their own shops.I have one son who is a freshman at Umass,twins that have 1 more year of high school.I keep telling them to get a mechanical Engineering degree,buy out a commercial plumbing business and roll everything into rental property.They'd be all done working by time they're 40.


All times are GMT -7. The time now is 01:34 AM.

Powered by vBulletin® Version 3.9.3.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.