vrodtyson

I installed Bly's removable center rigger back in March and I love it. It allows me to fish the wwb line at 150-165 yards and run another down the center at about 100-125 yards. This is all done with reels in the leaning post. It has been a very effective setup, this year. Also with all the grass we have had last three trips the wwb will trip if grass is on it. Just thought I would share it.

gfdriscoll

I added one on my 23 reg this year, same as you. Really looking forward to using it.

vettnman

What kind of price does that run? Nice looking setup

gfdriscoll

~450 I think

vrodtyson

450.00

vettnman

Appreciate it.

BayHouse

I got to use my CR really for the first time last weekend (not Blys). My rods are in a cockpit rocket launcher and I experienced a lot of creep back on the rigger (blacks clip). Did you have this same problem?

CLTdeerhunter

Check out marsh tacky on here I ordered a set from him he is first class.

cape_fisherman

Rigger creep isn't necessarily a product of the riggers...more like the riggING

vrodtyson

No none at all.Ck your rigging.

JWPGA

I love the center rigger on my boat too. As you mentioned it allows you to run a wwb line and also run a second line down the middle of you want. Some folks claim the center rigger is in the way...but I disagree.

steve76

Looks nice. Is there a certain angle to mount it?

vrodtyson

Nope comes with a sleeve to fit snuggly in your rod holder. It takes me about 3 minutes to set it up to go.

MattH

Love mine as well, now the shotgun doesn't have to be off the hard-top where it was hard to reach and harder to get out with a fish on, we were going to lose a rod/reel sooner or later, makes the center rigger look cheap!

BayHouse

What am I checking for? New 400# mono, new blacks clip and a pulley on the tip of the rigger. The mono does have a little slack in it, should it be tight or even loser?

vrodtyson

You have a pulley on the long end of the rigger? Just the mono, a clip a ball at the end and either a glass eye or pulley at the bottom of the rigger. My rigger line is spyder-line and its pretty snug. You do have a bungee of some sort also, right?

BayHouse

Yes, a pulley on the long end of the rigger (bought the boat with it that way). You're suggesting I should remove the pulley?

No ball either, I put a crimp in the middle of the blacks clip so it essentially serves as the stop (same as my outriggers). I do have a bungee connecting it to the tower leg.

Think I'll re-rig this with some para cord I have and bypass the pulley to see how that works next trip.

Thanks for the help!

vrodtyson

Remove the pulley.

cape_fisherman

Agreed, take the pulley off. You need some friction, otherwise you'll get the creep.

outerbanxer

Am I reading that correctly, 165 yards behind the boat?

And it will trip if grass get's on it?