Notices

Cutting an access hole

Old 08-15-2014, 03:45 AM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Oct 2003
Location: Statesboro Ga
Posts: 522
Smile Cutting an access hole

Need to cut a 4in access hole. The space is tight so any ideas are welcomed.
cred is offline  
Old 08-15-2014, 03:55 AM
  #2  
Admirals Club Admiral's Club Member
 
Join Date: Dec 2006
Location: charleston sc
Posts: 1,195
Default

Harborfreight sells a small saw and blades that runs off an air compressor its perfect for that.
I don't have the part number but it's a saw blade not a wheel.
capt.willy is offline  
Old 08-15-2014, 04:47 AM
  #3  
Senior Member
 
NTGator's Avatar
 
Join Date: Aug 2014
Location: Florida
Posts: 245
Default

For small holes I use a hold saw
for larger holes I use a Rotozip
For straight cuts I use a Multi-max
I use a Dremel to sand the edges

you can also use a router or jig saw

Just make sure you use Blue Tape to prevent chipping...
and mark the cut lines well...

Hope this helps...


Originally Posted by cred View Post
Need to cut a 4in access hole. The space is tight so any ideas are welcomed.
NTGator is offline  
Old 08-17-2014, 06:14 PM
  #4  
Senior Member
 
Join Date: Nov 2011
Location: Buies Creek, NC
Posts: 4,781
Default

Hole saw and right angle drill if not enough room for a regular drill.
dpcarson is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread