Slop in trailer jack.
12-04-2020, 12:17 PM
#1
Admirals Club 
Thread Starter
Slop in trailer jack.
I have been annoyed for a couple years with the slop in the swivel joint in the trailer jack when I lift the bow high to drain water.
I disassembled it to see why and then created a shim to act as a bushing inside the swivel joint.
‘I did use aluminum because that’s what I had but I think stainless would be better.
lots of grease and should be good for a couple years.
I disassembled it to see why and then created a shim to act as a bushing inside the swivel joint.
‘I did use aluminum because that’s what I had but I think stainless would be better.
lots of grease and should be good for a couple years.
