Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > The Boating Forum
Reload this Page >

Question concerning rubrail replacement on Pursuit

Notices

Question concerning rubrail replacement on Pursuit

Old 01-22-2019, 09:44 PM
  #1  
Senior MemberCaptains Club Member
Thread Starter
 
Join Date: Sep 2005
Location: orlando madbeach, fl
Posts: 8,686
Default Question concerning rubrail replacement on Pursuit

One of my winter projects this year is to replace the rubrail on my Pursuit 2870 CC.

I have done rubrail replacement on a handful of boats over the years but they were a little different than the original rail on the Pursuit.

My Pursuit has a flat aluminum stiffener behind the insert.

Is this a necessary item when replacing the rail?

In looking at the TACO online videos none of them show the installation of the aluminum strip.

One video is of an older Pursuit and they removed (old Ship Shape episode) the aluminum and did not replace it when installing the new rail.

Any suggestions?

Thanks in advance for the help!
signmansez is online now  
Old 01-23-2019, 02:02 AM
  #2  
Admirals Club Admiral's Club Member
 
Join Date: Dec 2016
Location: Florida
Posts: 1,894
Default

Subscribed. Also have a 28' Pursuit that could use a new rubrail.
tarpononecharter is online now  
Old 01-23-2019, 06:43 AM
  #3  
Senior Member
 
Join Date: Aug 2013
Location: Treasure Coast, FL
Posts: 355
Default

Is the insert plastic or stainless? The aluminum could be there in case of a hard impact which dislodges the receiver from the boat. If the insert is plastic or rubber, the aluminum could keep the rub rail from sagging after the impact and keep it in place. It could also be there to spread the load in the event of an impact to a piling, dock, etc...
snookwhaler is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread