Yamaha Multi-gauge RPM Reading Intermittent
08-17-2020, 09:25 AM
#1
Member
Thread Starter
Join Date: Jun 2020
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Yamaha Multi-gauge RPM Reading Intermittent
Yamaha Multi-gauge RPM Reading Intermittent
On my 2008 Yamaha F115, the RPM gauge shows intermittently. I just had these sent off to Gauge Saver and got them back. The Trim display is not working either. Suggestions?
On my 2008 Yamaha F115, the RPM gauge shows intermittently. I just had these sent off to Gauge Saver and got them back. The Trim display is not working either. Suggestions?
08-17-2020, 11:56 AM
#3
Member
Thread Starter
Join Date: Jun 2020
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by getthenetmontauk
You might have a short in the harness.
Well that’s awesome. I’ll try finding loose connections first? I have no issues with speedo and fuel gauge.
08-17-2020, 12:47 PM
#4
Senior Member
On the backside of gauge there is rubber plug with wires going thru it. Maneuver it til has a little gap. Water could be inside causing this. Happened to my rpm gauge a few years back from wasing boat
08-17-2020, 01:45 PM
#6
Member
Thread Starter
Join Date: Jun 2020
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by homerun
Next trip everything fine and still good today
Cool. I’ll check it. Looks like the trim part is not working due to the trim sending unit being stuck. I assume the little tab moves to tell you trim location.
