highflier1

So a friend has a seahunter, He said 42' but I am not sure. Either way it looks much like the picture above. the rod holders that are to the sides of the seat/storage area have one that came loose. There is no external screws so they obviously tighten from the underneath side. However I can not see how to get access to the underneath of these. Anybody out there now the answer of how to tighten those rod holders

mcnance865

I don't know, but I'm sure SeaHunter would be glad to help if they call/email them.

Jus Teasin

They might be "glued" in. Has he tried taking the cup holder out to reach the back of the rod holders?

Any access from the inside of the console?

Should have bought a better boat!

fishbone24

had a bunch come loose on mine all over the boat.(amongst a ton of other shit!) I tightened the ones I could get under and 5200'd the ones on the side of the console. is it a ice blue 41 with trip merc 350's?

Morningstar908

They are supposed to be like that so you can swivel bent butt rods...

highflier1

It can currently be lifted about 1/4" off the surface. Might be enough to get 5200 under it. Certainly not a swivel holder.

aftergolf

Have your friend contact Mark at Seahunter. He is always willing to help.