Go Back  The Hull Truth - Boating and Fishing Forum > BOATING FORUMS > The Boating Forum
Reload this Page >

Lenco's stopped working and LEDs flashing some kind of pattern?

Notices
The Boating Forum

Lenco's stopped working and LEDs flashing some kind of pattern?

Old 01-19-2020, 03:10 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Mar 2017
Posts: 141
Received 12 Likes on 11 Posts
Default Lenco's stopped working and LEDs flashing some kind of pattern?

So I took my boat out today and my Lenco's stopped working. They are connected to an accessory switch, when you flip the switch the tabs automatically raise and the LED indicator shows them as raised, then you can lower them how ever you want. So today I go to flip the switch and I don't hear them raise like I normally do, then the LED indicator starts flashing some weird sequence.

Here is a video of what its doing...

Anyone ever see that before?

And nothing happens when you push the trim tab buttons.
Old 01-19-2020, 04:18 PM
  #2  
Admirals Club Admiral's Club Member
 
Join Date: Jan 2007
Posts: 17,848
Received 2,921 Likes on 2,077 Posts
Default

if its not in the manual, and no one here knows, contact Lenco tomorrow, they have good support
Likes:
Old 01-19-2020, 07:42 PM
  #3  
Senior Member
 
Join Date: Mar 2009
Posts: 422
Likes: 0
Received 25 Likes on 22 Posts
Default

The first thing I would assume is that the Acc switch is bad or that the ground side of the acc switch does not have a good connection. How old is the switch? It doesnt have to be too old if it has been exposed to salt water spray. .I have had several boats with Lenco tabs and have never seen them wired through an Acc switch.
Old 01-19-2020, 09:23 PM
  #4  
THT Sponsor
THT sponsor
 
Join Date: Apr 2018
Location: Saint Augustine
Posts: 729
Received 549 Likes on 254 Posts
Default

Something has failed. Their customer service is great and will send out a new unit once you send in the defective one. I don't know what those codes are saying is wrong, but a quick phone call to them will fixe it. I had a trim tab motor fail. From the time I sent in the broken one plus received the new one was 8 business days, including my shipping and theirs.
Old 01-20-2020, 08:21 AM
  #5  
Admirals Club Admiral's Club Member
 
Join Date: Nov 2012
Location: Martin County Florida formerly Palm Beach County
Posts: 12,089
Received 2,764 Likes on 1,550 Posts
Default

ground?
Old 01-20-2020, 08:41 AM
  #6  
Senior Member
 
Join Date: Dec 2008
Location: So.East Mass
Posts: 242
Likes: 0
Received 33 Likes on 27 Posts
Default lenco

if you can see rear of switch, check wire connection.Older models were sealed with some type of soft material like silicone, later models were sealed with a type of hard epoxy. Earlier models the wire would pull out, I guess from the pounding. Due to the change in materials it seems they realized there was a problem and made a fix. Hope this helps

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.