Notices

CRC 6-56 - First time using

Old 07-14-2019, 05:47 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Jan 2018
Posts: 29
Default CRC 6-56 - First time using

This is my first boat, and I just purchased some CRC 6-56 after reading all of the positive things on the boards about it. I was hoping to use it on my outboard every couple of months to keep things running smoothly.

It is a little nerve wracking as a first timer taking the upper cowling off and spraying this stuff everywhere. Is there anything on the inside of my yamaha outboard that I DONT want to coat with this stuff as part of preventative maintenance?

Thanks!
stone9207 is offline  
Old 07-14-2019, 05:53 AM
  #2  
Admirals ClubCaptains Club Member Admiral's Club Member
 
Join Date: Dec 2003
Location: Fort Lauderdale, FL
Posts: 6,479
Default

The only area to keep away from is the belt, everything else let it rip. Also recommend rinsing off any salt deposits with some freshwater lightly misted from the hose.
sundancekid is offline  
Old 07-14-2019, 06:37 AM
  #3  
Senior MemberCaptains Club Member
 
Join Date: Mar 2002
Location: Pensacola, FL
Posts: 5,156
Default

I spray down my Suzukis with it and don't avoid anything. Been fine.

I also hose down my Waverunner motor with it.
DreamWeaver21 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread