View Single Post
Old 02-06-2017, 09:01 PM
Join Date: Jun 2015
Location: Moncks Corner SC
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts

Initially I wanted to go more than 30A and I have a spreadsheet of all the power draw on the boat, however the Blue seas fuse box I'm going to be using only supports 100A total 30A per line so unless I run a different type of breaker specifically for the panel then that's what I'm stuck with. I figured that since everything on the panel has a breaker with lower values that those would go first, although I see what you're getting at, if my total power draw with everything running is more than 30A I lose power to the panel. I ran the panel through the fuse as a redundancy but could have just left it unfused and connected the panel lead to the power lead on the fuse box? Open to suggestions though.