View Single Post
Old 04-15-2016, 03:40 PM
Bud Light Bandits
Admirals Club Admiral's Club Member
Join Date: Mar 2016
Posts: 142
Likes: 0
Received 2 Likes on 1 Post

Originally Posted by alloyboy View Post
Check the ground wire from the block to the sensor switch for continuity.

Check the ground wire from the sensor switch to the ECU.

Pay careful attention to the connectors along the way. Should be OK if new, except for the engine side connector which is not.

If the ECU does not sense a ground from the remote tank then the auto transfer mode is inhibited.

If you have a Yam multi-function gauge what is it telling you?
The gage is always blinking saying its low