View Single Post
Old 09-15-2014, 08:05 AM
  #6  
zucca13
Junior Member
 
Join Date: Jun 2009
Posts: 5
Default

You say it stopped working after running through rough water. That makes me think that you may have lost good contact with the cable prongs in the base. This can happen with the quick connect bases. Try removing the head from the base, make sure each cable is seated well and not loose in the base and then reseat the head. If you are lucky, you only lost contact of one or more cables due to the jostling from the rough water.
zucca13 is offline