View Single Post
Old 09-12-2014, 07:44 AM
Senior Member
Join Date: Dec 2002
Location: Southeast Michigan
Posts: 2,626

Sorry--but you cannot hook the HDS-5 to the outboard engine. You must connect the HDS-5 to a NMEA-2000 network. If your outboard engine supports NMEA-2000 and sends engine data to the network, and you also connect your outboard to the NMEA-2000 network, you can configure the HDS-5 to display the NMEA-2000 engine parameters the engine is sending.

Check with the manufacturer of the engine to discover what NMEA-2000 parameters it will send. The HDS-5 can display most standard engine parameters.
jhebert is offline