Old 09-11-2014, 09:11 AM
  #16  
knotreel
Senior Member
 
Join Date: Feb 2003
Location: Saint Francisville, LA
Posts: 1,814
Default

before you move it, check to see if its adjusted right. The leading edge should be just a bit proud of the bottom of the transom, maybe 1/8 inch. Then the aft part of the transducer should be a little lower than that, another 1/8" or so. If you can't find the specific instruction for your transducer if it is not an Airmar P66, you should be able to use the airmar P66 installation instructions for whatever yours is.
knotreel is offline