View Single Post
Old 02-22-2012, 04:07 PM
Senior MemberCaptains Club Member
Join Date: Nov 2003
Posts: 965
Received 11 Likes on 7 Posts
Talking flush mounting kit

Originally Posted by tpp517 View Post
No such thing as a flush mount kit. Remove the front bezel and you will find a mounting hole in each corner of the MFD. Once you cut the hole for the display to fit mark the mounting holes and bolt it in place.
FYI for the early C120 and E120 this is what was included in the box to surface/flush mount the unit to the console.
see pic
just use stainless locknut's Teflon/rubber washer and stainless washers to bolt the MFD to the console. Don't over tighten.
Attached Images