View Single Post
Old 02-15-2012, 12:29 AM
  #3  
Detlefb
Senior Member
 
Join Date: Aug 2010
Location: Hamburg, Germany
Posts: 169
Default

NMEA Input cable color are green ( Ve in minus) and white( Ve in plus).
Assuming that it is fine, please check general NMEA0183 setting, it has to be switched to 38400.
Pls refer to manual Chapter 12 ( System Integration Setup -- NMEA Port Setting )
Also recommandable is to upgrade the firmware to V5.04 as faulty calculation to TCPA is corrected, if not done.
If you follow Chapter 11 Operation Manual it should work. I have a E120 with AIS which is simular to C120.

Last edited by Detlefb; 02-15-2012 at 03:09 AM. Reason: added wires color for NMEA
Detlefb is offline