Old 01-31-2012, 09:07 PM
  #4  
alwayssomewhere
Member
 
Join Date: Nov 2009
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default

Q1&Q2: on installation manual, "NMEA 0183 devices must all be wired to one chartplotter on the network. The data is then shared over the network to other connected chartplotters."

Bonus question:As far as I know, GMI10 can not format NMEA0183 to NMEA2000, while 4210 can. Maybe you should connect intelliducer to one 4210, it will format depth data to NMEA2000 data,then GMI10 can share depth data over NMEA2K network. On Owner's Manual, "You can turn on, configure, or turn of output bridging. Output bridging occurs when a chartplotter takes NMEA 0183 data it receives from any source, formats it into NMEA 2000 data, and sends it over the NMEA 2000 bus.".