View Single Post
Old 05-26-2010, 06:59 PM
  #13  
emudryj
Admirals ClubCaptains Club Member Admiral's Club Member
 
Join Date: Oct 2007
Posts: 7,111
Default

Originally Posted by emudryj View Post
Great!!! it seems to be fairly easy... I have a good working relation with most new technologies so I do not expect to have big issue... now let me ask you someting...
I have 2 panels, 200 amps each.
I ordered the TED 5002C that comes with the handheld, the gateway and 2 mtu/ct.

the MTU/cts goes one on each panel and the gateway plugged in to an electrical outlet probably close to my computer.

Am I missing any extra piece of hardware if I want to monitor specific loads like the A/C, heater, etc???
will I be fine with the 2 MTUs/CT???

If I do I would like to know to order right away and get it all togheter...

I would appreciate your comment on this
forget it.....I re-read your post and now I understand better....

you set a baseline with whatever equipment you want to monitor being off.
then you hit learn and turn that equipment on... the difference in consumption is what the equipment is consuming....

got cha
emudryj is offline