View Single Post
Old 03-08-2010, 09:46 AM
  #2  
racedad70
Senior Member
 
Join Date: Jul 2009
Location: Sussex Virginia
Posts: 545
Likes: 0
Received 0 Likes on 0 Posts
Default

OK, I am new to this as well. I just went through this myself.

First off, Do you have a fuel flow meter(EP60r) Lowrance model tied into your NMEA 2000 network? If not that is your problem, it has to have one to read fuel flow.
I have read somewhere on here that the Lowrance will not see the Yamaha flow device. You will need the lowrance fuel flow device.

I bought a LMF 200, ep60r fuel flow meter and two HDS 7's and hooked it all up over the week end and found I did not even need the LMF 200, because once the fuel flow is tied into the network the HDS units picks it up and will allow you to set your parameters.
Hope this helped. Contact a board member by the name"tcm" here and he is very knowledgable on these units.

Last edited by racedad70; 03-08-2010 at 09:55 AM. Reason: wording