View Single Post
Old 01-14-2010, 05:41 AM
  #4  
JP 3
Senior MemberCaptains Club Member
 
Join Date: Oct 2001
Location: Mt. Pleasant, SC
Posts: 130
Default Use the 3m panel adhesive

I've used the 3m panel adhesive and it is great stuff. If you are careful, you do not need the gun.

As I recall, I cut the tubes [which are connected] open. Then I used a 8" ratchet extender to push out the amount I needed, then mixed them together and applied.

While 5200 may work, it is a completely different animal. The panel advesive becomes very hard while 5200 stays flexible.
JP 3 is offline