Thread: ACR Spotlight
View Single Post
Old 04-01-2003, 05:42 PM
Senior MemberCaptains Club Member
Join Date: Aug 2002
Location: Newport News VA
Posts: 641
Likes: 0
Received 0 Likes on 0 Posts
Default ACR Spotlight

I pulled the aftmost leg of my bow rail and drilled through the bottom plate, then drilled a hole down into the gunnel to get back to the helm for the control panel, and also aft to the battery for power. Up at the light I drilled straight into the inside of the bowrail. The mount is 2 seperate pieces of starboard, one above the rail and one below the rail, so the wire comes in between them and then up through the top one and into the bottom of the light.
jdfnav69 is offline