View Single Post
Old 12-01-2003, 06:47 AM
  #2  
captadamnj
Senior MemberCaptains Club Member
 
Join Date: Dec 2002
Location: South Jersey
Posts: 391
Default navnet to 582 ??

it will definitely work. you need the nmea cable for the 1732 and the nmea cable for the 582. then, connect the proper nmea tx +/- wires from the 1732 to the proper nmea rx +/- wires on the 582. the colors will be specific to the cables that you purchase. ask the people where you purchased the cable which colors are which. or e-mail furuno directly through their website. they were great at helping me get my furuno stuff networked together.

after the wires are connected, you will then also have to go into the nmea setup menu on the 1732 and turn on the appropriate nmea sentences to output the desired information.

those are the steps, connect nmea tx +/- to nmea rx +/- and then turn on the appropriate sentences.

good luck.

------------
Capt. Adam
Karen Ann II
captadamnj is offline