View Single Post
Old 10-06-2008, 05:05 AM
  #3  
pbr streetgang
Senior Member
 
pbr streetgang's Avatar
 
Join Date: Aug 2008
Location: Nowhere near Uranus
Posts: 7,130
Default RE: Furono plotter to yamaha speed gauge

renner - 10/5/2008 5:52 PM

My question is does the gauge convert kts to mph because it seems right or damm close , I could,nt seem to be able to change the gauge to read kts or maybee i am missing something? Thanks in advance
Command LinkOperation Manual (Pg.32)

You can choose either MPH, KM/H or Knots;

1). engine off, engine start switch on

2). press and hold mode button 4 secs

3). press mode button to switch between setting funtion names

4). press set button to switch to the change settings menu

5). press mode button to switch between the displays

6). press set button to switch between the displayed units

7). press set button (1 sec) to change the displayed unit and return to the custom mode selection display

8). press set button (1 sec) to return to the normal display

The TRIP display can also be set to display miles, nautical miles, or kilometers.


pbr streetgang is offline