View Single Post
Old 12-19-2003, 09:37 PM
MemberCaptains Club Member
Join Date: Oct 2002
Location: Scappoose, Oregon
Posts: 64
Default Best way to cut hole for speakers ?

Birdman is right on with the Rotozip and the fiberglass bit. I used the Duracut Zip Bit for Cement Board and Plaster/Lath. RZ250 1/4". About $10 at Home Depot. It says "works great on fiberglass and stucco".

I used the hole cutting attachment for the Rotozip and it made perfect holes. Adjustable diameter and it uses a pilot hole for rotating on. Take it slow and it will work great. Good luck.
Zinger is offline