Old 09-16-2020, 03:04 AM
Senior Member
THT sponsor
Join Date: Aug 2011
Location: Beaufort NC
Posts: 6,074
Received 2,703 Likes on 1,267 Posts

You're gut is correct, glue into thickened resin, filet and glass away! You can glass the panel first to help stiffen it if needed, then tab in. Or glass the panel in place and extend each layer as tabbing, either is fine. I use Divinycell H60 or H80 foam for all bulkheads and glass the larger ones first for stiffness but they are sometimes 18' wide or more and 15' tall, you're small one shouldn't have an issue.