View Single Post
Old 08-24-2020, 07:33 PM
Join Date: Aug 2020
Location: NC
Posts: 85
Likes: 0
Received 13 Likes on 11 Posts
Default Need to add a tilt switch

I have a 1998 Yamaha 60 hp. The only trim switch is on the throttle and Iím getting tired of climbing in the boat to trim the motor all the time. I have searched here and the internet for how to add a up and down switch to the stern of the boat. I can fing the switch itself but how to wire it eludes me. Is it as simple as wiring splicing it to the current wiring or do I need to connect it to the relay on the motor that the current tilt is wired to.
Thanks for any thoughts.