Old 12-21-2006, 10:28 AM
Senior Member
Join Date: Nov 2002
Location: DE
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Default Re: T-Top floor mount repair advice requested

I have used the stainless toggle bolts with success on seating and my T-Top. They are 1/4 inch bolt type. That "wood" Parker floor held up fine. Use as many as you can, add the 5200 on the bottom of fixture being bolted to floor and only tighten about 1/2 way at first. After the 5200 has set-up a good bit then tighten down completely.