Old 12-06-2017, 05:37 PM
  #7  
cwhite6
Admirals Club Admiral's Club Member
 
Join Date: Aug 2012
Location: Pineville, LA
Posts: 5,082
Default

Originally Posted by stephenson View Post
Thanks, All.

cwhite6 - there is a standard cable that Lawrence makes (120-37) that hooks direct to the Yamaha, then to the NMEA backbone through the usual method. I don't think this part is any more complicated than that.

My general question on components is that while they all work with the data the same, and the connections are the same, the outside size/shape of the components is not the same - i.e. I had read one report where a fellow got different components that worked together, but he was exasperated because they would not lay flat for his install. A common manufacturer should make the install cleaner and easier. Which one is most commonly used?

The other component of my question is simply a price question .... :-)

Thanks!!
I believe I used Garmin tees simply for the fact I found them the cheapest. I am aware of the cable you speak. I was more talking about if you have two Command Link gauges like I do and you want to add the ability to connect to a backbone. To do that you need a gateway.
cwhite6 is offline