View Single Post
Old 04-02-2017, 04:49 PM
Join Date: Jun 2015
Location: Moncks Corner SC
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts

smccormick thanks for the reply. I was more worried about all the accessory pumps interfering with the transducers especially the 3d structure scan but that does make sense that there shouldn't be too much anyway. Steering is cable and trim tab pump is mounted in the bilge on the transom so no hydraulic worries there and the fuel tank is aft as well so I don't have to worry about that. I think I can get away with a 2" or 2.5" pvc for the rigging tube and I'm thinking of clamping it to the side or going with steel cable ties but I'm open for suggestions there.

I like that WEMA is steel and its a bit smaller than the Ultra and the price is a lot more reasonable however, I'd rather mount it to the pump and it didn't look like I could do that with the WEMA. How are you mounting them?