DDHAND,
Thank you for contacitng us with your situation.
Well, it is possible to connect the ATR trigger wire (orange, 22ga w/inline 1.5 amp) to an on/off switch, which would allow you to "turn off" the ATR feature while you are fishing and turn it back on when you are done for the day on the ride home. If that is more trouble than you want to deal with, then all you have to do is remove the ATR trigger wire's inline 1.5 amp fuse which will prevent the system from "arming" itself for operation. Please take a look under your helm and see if you can find the black box with gray potting, which is most likely connect right up to your trim tab controls. You should see that it has six (6) wires coming out of it; orange (22ga), black (22ga), orange (14ga), Red (14ga), Green (14ga) & Yellow (14ga). After you have found the unit you can try the fuse trick first to see how it like it before you install the switch option. Please give this a try and let us know if you have anymore questions.
We look forward to your reply.
Regards,
MJ Thomas
Account Manager
Bennett Marine, Inc.
550 Jim Moran Blvd.
Deerfield Beach, FL 33442
Service hours: 8:00 am - 5:00 pm Monday - Friday (EST)
Phone: (954) 427-1400
Fax: (954) 480-2897
www.bennetttrimtabs.com info@bennetttrimtabs.com