The Hull Truth - Boating and Fishing Forum

Go Back   >
Search


Reply
 
Thread Tools Search this Thread
Old 03-03-2007, 09:19 PM   #1
Junior Member
Thread Starter
 
Join Date: Mar 2007
Location: Chesapeake Bay, MD Waters
Posts: 25
Default Help on Penn 9m Levelwind Rebuild

Hadn't used my old Penn 9m levelwind in a while and pulled it out to take a look today. It had alot of corrosion and didnt crank very smoothly so (figuring it was a cheap reel) I decided to take a look inside...

So right now I'v cleaned and lubed up about everything that looked cruddy, but I'm stuck with putting it back together. I can't seem to figure out the freespool lever and spring positioning from looking at the schematics and parts list... and two other small brass peices that seemed to fall out when I opened it up that I can't seem to fit back in...
I was kind of expecting something like this to happen but my sketch of the pieces as they came out wasnt up to par.

If anybody has any input it I'd greatly appreciate it!
Tombass123 is offline   Reply With Quote
Old 03-03-2007, 10:34 PM   #2
Senior MemberCaptains Club Member
 
Join Date: Mar 2005
Location: Rhode Island
Posts: 360
Default Re: Help on Penn 9m Levelwind Rebuild

Hi,
I've been there. I used this site, not bad and some of the tips and photos are relavant.
http://www.kayaksportfishing.com/tac...aintenance.htm
also
http://www.charkbait.com/article/maint1.htm
Jay
jaydon is offline   Reply With Quote
Old 03-04-2007, 02:34 PM   #3
Senior MemberCaptains Club MemberPLEDGER
 
Join Date: Jan 2005
Location: saratoga, california
Posts: 1,996
Default Re: Help on Penn 9m Levelwind Rebuild

your reel is most similar to the penn 114h. these two posts should get you back on track. let me know how it works. alan

http://www.thehulltruth.com/forums/t...ighlightmode=1

http://www.thehulltruth.com/forums/t...ode=1#M1030856

alantani is offline   Reply With Quote
Old 03-04-2007, 03:51 PM   #4
Junior Member
Thread Starter
 
Join Date: Mar 2007
Location: Chesapeake Bay, MD Waters
Posts: 25
Default Re: Help on Penn 9m Levelwind Rebuild

Got it all fixed up and good as new! the dog and dog spring were a little different but it just took a couple tries to get it right. Now i'll have fix up the senator with all those great sites!
Thanks A TON guys!
Tombass123 is offline   Reply With Quote
Old 03-04-2007, 04:27 PM   #5
Senior MemberCaptains Club MemberPLEDGER
 
Join Date: Jan 2005
Location: saratoga, california
Posts: 1,996
Default Re: Help on Penn 9m Levelwind Rebuild

boy, that was fast!
alantani is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Forum Jump


All times are GMT -7. The time now is 12:45 PM.


©2009 TheHullTruth.com

Powered by vBulletin® Version 3.9.3.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.