GWC3

this weekend my raymarine 41xx radar 4ft scanner wouldn't transmit. After the 90 second warm up period on the display you get the standby message that says "to transmit hit the power button". Well when I do that nothing happens and after about 30 secs I get a warning message: "radar not transmitting". So the display powers up but the radar doesn't start turning. Things I checked so far:
- yes the on/off switch is "on" (and I tried powering up with it off and it did detect the off position"
- I checked the menu setup to see if anything was "off" that shouldn't be (not that I changed anything)
Now, the radar worked fine last weekend and did since re-commissioning 5 weeks ago.
so, what to check before I send it in? thanks

yachtjim

I would go to the boat then call Ray tech support at 800-539-5539 to see what they advise. They can advise you much better than I can.

__________________

GWC3

thanks jim - their ph# helps