Price and availability - The Hull Truth

steelhead130 · 02-20-2007, 01:20 PM

Jim,
Im putting together my spring project list and a few things Im looking for your advise on. Im going to put in a charging relay- either a Blue Seas ACR or the BEP 716.
I didnt see either of them on your site, so first can you get them and second what are your thoughts on these 2 units? I like the BEP system just on the ease of install and compactness of the unit. I have a single engine 2 battery system.
Also going to install a tilted element transducer for my Sea Pro.
And lastly the Navionics NavPlanner. Looking to do this before months end.
Thanks Dan

yachtjim · 02-20-2007, 07:35 PM

Hi Dan, we don't have the BEP Systems on the site but we do carry them. The ACR system is called the 7650, just search 7650 to find it and Navplanner to find the Navplanner. I use a Blue Sea setup similar to the 7650 and have been very pleased, there has been lots written about it on here. I have heard only good things about the BEP setup too. The tilted ducers are $205. Just search "tilt" on our site to find them. They come in 12 and 20 degree to match your deadrise. Do you have any specific questions about any of these items?

steelhead130 · 02-21-2007, 10:51 PM

Jim,
A few questions about the ACR system. Can you hook a battery charger up to it to charge your batteries in the driveway? Another post I read while doing a search on these said with the BEP system he hooked up a single charger up to the system and it charged both batteries. If I can do this it would work out perfectly for what I plan to do.
The plan I have is my 2 batteries in my rear battery case will work off the ACR or BEP system and the altenator. I have a 3rd battery I want to add to my console for some lighting and backup stuff. I was going to buy a 2 or 3 bank charger to hook everything up, but If I can run it to the ACR and the second lead from the charger to a 3rd battery I have it all setup.
Thanks for any help you can give me, also the price for the BEP system in 2 or 3 bank setup.
Thanks Dan