How to connect Navnet 3 to Standard Horizon 1500 Quest???

[RM]

Ok so was trying to get my Navnet 3d connected to Standard Horizon 1500 but can't seem to get to work. Here is what I was doing where am going wrong?

S-H Navnet

Blue Wire ----- Blue wire

Green wire ----- Blue white wire

I also tried swaping these connections but still didnt work. Which is the+ wire and which the - wire? Is there another connection that needs to be made?

Also I added in the Navnet setup Port 3 which is what the manual shows as the Blue & blue white wires. In the setup menu do I have to change any other settings?

What are sentences and which boxes need to be checked in the installation wizard?


Thanks

[Albiemanmike]

Just call Furuno on Monday and they will set you straight. They will even walk you through the setup while you are on the boat actually doing it.

[Idiot]

connect as follows

furuno green --------------- standard blue
furuno green/white ------------ standard green
furuno blue -----------------standard gray
furuno blue/white------------standard brown

[RM]

Thanks do all of those need to be connected or only one pair?

[Idiot]

the first 2 are all you really need at this point, they will send GPS info to the VHF radio.

i havent tried it yet, but apparently the navnet 3d does not support DSC plotting on the gps screen. but this may become functional in future updates so it can't hurt to wire up the other 2 connections now.