Garmin 2006C one Map Chip and one Bathametric Chip

[jweschler]

I am trying to get the detail information and contor line to show up on the screen. I have gone down to .3 NM and still do not see the detail. Does anyone have the bathometric chip and if you can tell me what I am doing wrong?

[inthewind]

If this is a c-map chip, detail disappears below the level of the original capture. In my particular area this is 12NM. Any scale below that will not display contour or depth information.

Try going up in scale and see where it starts to appear.

Cat-a-tonic

[Tsunami]

If it is a Bluechart make sure you have the declutter set to off. Mine shows 12, 18, 30 and 60 ft contor lines plus numeric depth numbers on the chart. Only other thing I can think of would be that you don't have your chip in right or you are in an area that the chip does not cover.

Kirk

www.geocities.com/reel_time_fishing_team/