Yamaha Command Link

[PRESTIGE]

My engine sign turned on at 100 hrs on both motors at different times, is this normal? it is not blinking, if so how do I reset them, after I change the oil. thanks in advance for your comments.

[Joe]

Yes this is normal.

Here's how to fix it (for the square gauges). I don't know if it's the same for the round gauges.


MAINTENANCE (resetting maintenance intervals)
You can reset the elapsed time from the previous maintenance interval (when the meter was reset).

1. Turn the engine off and the engine start switch to ON.

2. Press [MODE] (4 seconds): To activate the custom mode.

3. Press [SET] To switch to the resetting display.

4. Press [SET]+ [MODE](1 second): To reset the elapsed time to “0h.”

5. Press [SET] (1 second): To return to the normal display.

NOTE: Press the [SET] button for 1 second from step 3 to cancel the resetting of the elapsed time and return to the custom mode selection
display.