Garmin 3210C and GMR 41 Radar install help This is the first time I have let someone else install marine electronics on a boat...
I went by to see the completed job and the Radar unit is mounted with a slight cant (as it should be) directly to the T-top. The GPS Receiver is also mounted directly to the T-top right next to the radar on the starboard side approximately 18 inches or soaway. Will this be ok?
The Garmin manual says to install the GPS Receiver below or above the radar unit. To me this does not seem to be the case. These folks install a lot of these units and I haven't argued with them yet that the Radar needs to be raised up, but I want to know if I need to or do you guys think this ok what has been done.
More detail....The GPS Receiver is on a threaded stand that does not have any raise to it. The Garmin unit like I said is directly on the T-top except for the 1/2 and 3/4 starboard "stands" that are used to give it a slight tilt forward.
In the past I have always installed the radar on a 6 inch or great base to raise it up.
Thanks,
TM
__________________ Capt. Tully Mars 
--------------------------------
"A keel, sails, and wood is a ship. But what a ship is....is freedom" -Capt. Jack Sparrow |