SICK of that RUSTED Mercury Bracket? - The Hull Truth

ARTEC · 09-08-2010, 10:11 AM

By popular request, here is the NEW replacment Mercury Oil tank Bracket.

We all know that the OEM Mercury brackets are weak and subject to rusting out quickly.

Here is the solution to both problems.

This bracket is made from either lightweight 6061 T6 Aluminum or high quality, long lasting, high strength 316 STAINLESS STEEL.

Features / Options include:
•One piece bottom design, carefully engineered for ultimate strength. Reservoir fits snug, eliminating unwanted oil sloshing.
•No welds to to fatigue and crack over time.
•CNC Cut from 1/8" thick 6061 T6 Aluminum or 12GA. high quality 316 stainless steel plate for a worry-free life
•Four - 1/4" countersunk holes in bottom for flush, secure fastening
•Artec logo cutout
•**Lifetime No-Hassle replacement on STAINLESS STEEL Bracket!

Our bracket works on many common Mercury out-board motors. This is a direct replacement for brackets 12335A1 or 884481A1. Refer to the Mercury Oil Tank Bracket Compatibility List for Mercury model numbers this bracket fits.

GET YOURS TODAY AND FORGET ABOUT THAT BRACKET FROM NOW ON.

http://artecindustries.3dcartstores....asp?itemid=122

ARTEC · 09-09-2010, 11:16 AM

Thanks for the orders.

These mounts will begin shipping on Monday.

GET YOURS NOW and NEVER WORRY ABOUT IT AGAIN!!!

ARTEC · 09-13-2010, 05:43 PM

All orders for these shipped out today.

Now these are off preorder and available for regular purchase. The lead time is normally a week but we seem to be able to get them out a little faster than that.

Remember the stainless steel is high quality (high $$$) MARINE GRADE 316 Stainless specially made for use in saltwater applications.

ARTEC · 09-24-2010, 10:18 AM

Tired of the garbage OEM bracket? Mad about the mess the rust leaves behind?

Never worry about that bracket again!!! Get these great aluminum or stainless steel replacements today!

prockvoan · 09-26-2010, 07:49 AM

So, what is the cost on them?

chrisrack · 09-26-2010, 02:50 PM

Do you make a bracket for 24-series battries? If so, what is the cost?

captbone · 09-26-2010, 03:14 PM

Any blemish or mistake ones? I need one for my 3 gallon Optimax tank and dont care what it looks like or if it has the design cut in it.

Any basic versions? My will be buried in the bilge and never be seen.

nate. · 09-26-2010, 07:53 PM

could you make something cool lookin for an etec oil tank?

ARTEC · 09-27-2010, 10:19 AM

Quote:

Originally Posted by prockvoan

So, what is the cost on them?

There are two options for this bracket. Click on this PRODUCT LINK for current pricing. Our 10% off sale ends on October 1st so get them now if you want to save some $$.

Quote:

Originally Posted by chrisrack

Do you make a bracket for 24-series battries? If so, what is the cost?

What group 24 battery do you have specifically? I have one prototyped for a Deka but have not been able to test it yet.

Quote:

Originally Posted by captbone

Any blemish or mistake ones? I need one for my 3 gallon Optimax tank and dont care what it looks like or if it has the design cut in it.

Any basic versions? My will be buried in the bilge and never be seen.

No blems, except a bare steel version that we used for protyping (wouldn't recommend it for the bilge). This is as basic as it gets. The cutout is just our logo and is usually covered up anyways once mounted but it helps brand our product.

Quote:

Originally Posted by nate.

could you make something cool lookin for an etec oil tank?

Possibly, can you PM me more specifics? The OEM Mercury and Yamaha brackets were donated to us by THTers for prototyping so we'd need something to work from.

23Dorado · 09-27-2010, 04:16 PM

Do you have one that mounts to a bulk head and not the deck? Screw holes on the vertical side. Not the bottom.

ARTEC · 09-28-2010, 09:49 AM

Quote:

Originally Posted by 23Dorado

Do you have one that mounts to a bulk head and not the deck? Screw holes on the vertical side. Not the bottom.

We can put the bolt holes anywhere you like. If you have a specific pattern they need to match just let us know, otherwise we'll just use a generic pattern.

When you check out, just provide the specifics in the comments field during checkout. As long as there are only 4 bolt holes, there will be no extra charge.

I'd recommend the stainless steel for this simply because it is stronger.

http://artecindustries.3dcartstores....et-_p_122.html

ARTEC · 10-01-2010, 03:12 PM

LAST DAY OF THE SALE!!!! Get 10% off now.

ARTEC · 10-18-2010, 12:19 PM

We are running a 20% Off Sale right now specifically for Marine Brackets. Sale Ends Nov 1st. Get these NOW at a great deal and never worry about a rusty bracket again.

http://artecindustries.3dcartstores....kets_c_25.html

ARTEC · 10-20-2010, 01:45 PM

Thanks for the orders.

Replace that ugly rusty wire crap from Mercury and give your boat something MUCH better LOOKING and MUCH more DURABLE.

ARTEC · 10-25-2010, 12:13 PM

Only 1 more week for this promotion. Replace yours now!!!!!!!

ARTEC · 10-28-2010, 05:55 PM

Only a few more days left.....Get yours today.

Sale ends Nov. 1st.

ARTEC · 11-01-2010, 11:33 AM

We had some issues when trying to checkout on this bracket that have now been resolved. Sorry for the inconvenience.

LAST DAY OF THE SALE!