| | Re: JOHNSON 150 HP OCEAN RUNNER/EX CONDITION
I had them on Craigs list this week and sold the counter rotating engine first.
I do have another counter rotating engine in my garage that has been stored for a few years as I bought it for a spare from a dealer that is a friend of mine. It is an Evinrude Ocean Pro 1994 with about as many hours. The engine had a stripped out steering arm (threads) and needed the arm replaced and the tilt/trim motor was dead.
I bought the engine and bought a new steering arm(stainless steel) for $459 and also bought a new PT&Tilt. I have not installed the Tilt and Trim as I have never used it. The compression on the cylinders is the following: 1-110 2-108 3-110 4-107 5-110 6-106 I ran the engine and changed the lower unit gear oil and fogged with OMC Storage oil, oiled the cylinders from the plug hole, and wrapped and stored the engine. All carbs were drained and dried with compressed air.
I am sure it will fire right up and purr. Don't know if you are interested in this set up as a pair as I happen to have 2 Ocean Pro Hoods with one having Counter Rotating on the back. I bought them because they matched the cushions on my boat better than the Johnson hoods. I would have to put the Tilt/Trim on and that is about it.
If it is something that interests you, give me a shout. I was planning on selling this engine after the other 2 were sold. I did not think it would happen so quick and I made the first guy take the counter rotating engine because I did not want to explain to the average Joe why the engine really did not run backwards if it was the one left to sell.
REGULATOR 23------------Twin F150 Yamahas
PARKER 21 DVCC----------Verado 225
PARKER 18----------------Suzuki DF140
PARKER 18----------------Yamaha F115
BAYRIDER 1860------------Yamaha F90
CAROLINA SKIFF 16 CC-----Evinrude 35
CAROLINA SKIFF 16---------Merc 20
RIVER OX 16----------------Evinrude 40