Large Wedge Question. - The Hull Truth

CJS · 07-14-2008, 08:53 AM

As per you website, the base dimensions of the large
Wedge are 20" x 20". is is possible for the width to
be squeezed down to 18 inches without damaging the
seat? It needs to fit between a transom well and the
side of the boat which is 18 at the floor and tapers out
to 24 at the gunwale.

marinebeanbags.com · 07-15-2008, 09:08 PM

Quote:

CJS - 7/14/2008 7:53 AM As per you website, the base dimensions of the large Wedge are 20" x 20". is is possible for the width to be squeezed down to 18 inches without damaging the seat? It needs to fit between a transom well and the side of the boat which is 18 at the floor and tapers out to 24 at the gunwale.

The large Wedge will fit in the smaller space just fine, that's the beauty of our product, it will conform to any shape. The 20" x 20" measurement is the seating suface measurement not the footprint. It is from the leading edge under your knees to the lumber area before the backrest begins.

I think the footprint was the dimension you are really looking for. The footprint is 20"wide x 34"long

Large Wedge Specs

Dimensions 20"W X 34"L X 36"H
Seat 20"W X 20"L X 14"H