tmoutinho

I took out my nav chip and inserted fish and chips, when I put nav chip back in, I got all my info (waypoints, tracks,etc) but I do not get any depth reading or channel markers, showing on the screen.
I was very careful exchanging the chips and followed the screen directions- how do I get the depth and channel markers to show?

Thx

CMBobby

Hi tmoutinho,

Sorry for the long delay in our response-- here's what I gathered from Raymarine. It sounds as if perhaps there are some things you need to make sure are adjusted properly in the menus and settings.

In the menu under chart set-up you should make sure that (1) your safety contour is set, (2) that your spot soundings are set to "on", and (3) you have your depth contour set to "all". Also you may want to range out a little as well so everything is showing on the screen.

Hopefully this answers your question as to why the info isn't showing back up. Let me know if it doesn't seem to fix the problem and we'll try something else. Thanks, and have a great day,

__________________
Bobby M.
intl@consumersmarine.com
(800)332-2628 ext 1126

tmoutinho

thx will try it next week