1984 23' Seacraft CC (2007/2008 Winter REDO) *******SOLD****** - The Hull Truth

parrott · 01-27-2009, 09:26 PM

2001 Yamaha 225hp OX66 400+/- Hours
New Water Pump, Cleaned O2 Sensor, Cleaned VST Filter, New Plugs This past Fall
Custom T-Top with front and back spreader lights
Birdsall Leaning post with backrest
Stainless Marine Bracket with 3 step ladder
** New/Reinforced Floor- Raised 1.5" from factory to accomodate 4stroke ***(3/4" Marine Grade Plywood)
Transom , Bracket and gas tank replacement were done by Jupiter Boatworks in Florida *

Newer Console
Fresh paint inside and out (Awlgrip)
All new wiring throughout
Lenco Trim tabs
New Stainless Rub Rail
New Hatches
Electronics Box
Cushions for Console AND two for the top of the transom
Hydraulic sterring
Flush mount cleats and bow light
Dual Batteries with switch
Dual Pro Battery Charger
Two storage hatches in console

New* Lees 16ft. Aluminum Outriggers
17 Rod holders including rocket launchers
2- Outlet Plugs at transom for electric reels
65gal Baitwell with two LEDs in it ** Keeps bait really good **
Insulated bait box or cooler in middle hatch of transom
Red LEDs under gunnels
Flouresent in T-Top
Courtesy Lights at bottom of console
Racor Fuel/Water seperator
2- 1400gph Rule Bilge pumps with Float switches
1- 1400gph Rule Tournament Series bait pump
One extra thru-hull for washdown pump
** All thru-hulls are bronze and have bronze seacocks **
Richie Compass
Icom VHF DSC capability
1650 Furuno Color Combo GPS/Depth
Clarion Waterproof AM/FM/CD
2- 6x9" Memphis Marine Audio
1- 10" Memphis Marine Audio Sub Woofer
Memphis Amplifier
2001 Continental Aluminum Trailer
4 NEW Tires

Pictures of complete restore

Asking 23,000.00* OR Trade for a 20-23ft Cuddy Cabin* ***Reduced $20,000.00

Call 252-342-2509

More pics on my other post / and will get some in the daylight the next day or two

Yes that is snow in last pics...

*

parrott · 01-29-2009, 03:17 PM

Will get some pics in the daylight this weekend. Reason for selling is my wife is pregnant and wants a cuddy... Make an offer..

1320racing · 01-29-2009, 03:54 PM

This boat was done right... no shortcuts - I've seen it during and after...

rayos · 01-29-2009, 06:03 PM

Nice boat and restoration. How does it ride compared to your 25? Also, what is the top speed?

Thanks,

parrott · 01-29-2009, 07:25 PM

Thanks. As far as the ride goes, it close enough you can't tell a difference. But performance wise the 300 is the way to go. When I raised the floor the plan was for a 4stroke to be put on it. At least a 300 or by the time I needed a 4stroke a 350 or 400 would be a better choice. Boat is rated for 500hp and the transom could very easily handle it. Conditions just right you can hit 45. In the ocean with your gear you are looking at a good 40, thats with the engine trimmed down and tabs. Cruise 4200rpm at 32mph at 2.0mpg. Cruise 38/3900 at 28mph at 2.5mpg. A bracket on these boats are diffenatly the way to go. You can tell the biggest difference in a sea and the ability the motor has to keep the bow down.

anitafish · 01-31-2009, 06:30 PM

I have a Classic 20Hatteras Overnighter for sale. I have already got the replacement boat, a 25
Grady Sailfish. Sale your boat and pick mine up for $7000 and have some cash for new electronics. Boat pics at http://s702.photobucket.com/albums/w...afilter=images

parrott · 01-31-2009, 06:52 PM

I am actually looking at the later 80s model GW's. Some I have noticed have the brackets on them. I will have to pass at this time. Thanks

JJo · 02-01-2009, 08:44 PM

nice seacraft, would you be interested in a 1998 sea ray 215 express cruiser for a trade, its in really good condition.

parrott · 02-02-2009, 06:05 AM

Thanks. I am going to have to pass at this time.

parrott · 02-03-2009, 12:51 PM

reduced

SC quacker · 02-03-2009, 02:27 PM

Please help me understand why you had to raise the floor?

Cracker · 02-03-2009, 02:45 PM

Quote:

SC quacker - 2/3/2009 4:27 PM

Please help me understand why you had to raise the floor?

I would imagine so the weight of the engine would not keep the scuppers under water, since this boat was built before 4 stroke outboards. This is just a guess... Nice looking boat BTW

parrott · 02-03-2009, 03:18 PM

You do not have to raise the floor putting a 2stroke on it. My plan was, and still may, was to put a 4stroke on it. With the extra weight I wanted to make sure it would self bail, which it does easily. Like I said it is 1.5" higher than the factory floor, and could easily handle todays 300hp/350hp 4strokes. Thanks

Reelescape1 · 02-03-2009, 07:48 PM

Very common modification to the older SeaCrafts

johngentry4 · 02-03-2009, 08:19 PM

Are you still not interested in trading for my 27ft Cobia? Took it out this past weekend and it ran awesome. Topped out at 46 mph. Plan on taking my 3yr old out fishing this coming weekend.

RumBumBermuda · 02-03-2009, 08:23 PM

Wow man she looks great.

parrott · 02-04-2009, 05:23 AM

Johngentry I am still going to have to pass at this time.
Thanks RumBum

mahimaster1 · 02-04-2009, 08:19 AM

will you sell without the motor?

parrott · 02-04-2009, 09:20 AM

Don't really want to. Send me a PM with a offer I can't pass up and I will let you know.. Thanks

markm · 02-04-2009, 06:12 PM

Please someone buy this boat before I end up divorced for buying another boat.
MM