WHERE TO MOUNT MY FURUNO TRANSDUCER ON MY MAVERICK

[SKINEACE]

I'M HAVING A TOUGH TIME TRYING TO FIND A GOOD PLACE TO MOUNT MY TRANSDUCER ON THE TRANSOME OF MY MAVERICK MASTER ANGLER 17 FT.DUE TO THE FALSE BOTTOM.I'VE MOVED IT 3 TIMES AND NOW HAVE IT RIGHT NEXT TO MY TRIM TAB.IT WORKS AT IDLE BUT NOT ON A PLANE.LOOKING FOR AN ANSWER WITHOUT HAVING TO GO TO A THRU HULL TRANSDUCER. HELP !!!!!SKINEACE

[ReelWork]

Working at idle? Well, that's sounds like problem in how it is positioned, not where. Do you have the sensor deep enough in the water below the keel line. Remember, it needs clean water that is free of bubbles and such for a good reading.

Remember that the trailing edge will be lower than the leading edge and the leading edge should be a little bit lower than the line coming off the hull. You need to look at this will at speed to see whether or not the angle is best. If you can, leave it just loose enough to where you can adjust on the water, but to where it stays put while underway.