Quick opnions needed please !!!

[baileydale]

Plan to sign a contract tomorrow on a 2001 210 Logic ( Triumph ). I know some don't care for the "plastic" boat but I think it will serve my needs well. It has a 130 Johnson Ocean Pro, I would like comments on both boat and motor but most importantly the motor as I am not familiar with it ( low hours, don't know exactly how many yet ) Boat is in Ga and I am in Central NC and plan to go inspect/bring home Sat. For those that have experence with the Logic is there anything in paticular I should look for?
Thanks,
David

[ronnrs]

My dad had one. the only thing he ever changed on it was the spark plugs and the water pump, and that is when he first got the boat about a year ago.

[Mumblerone]

Should at least check the compression on the motor.* These are great motors; I assume you done a SEARCH above on the boat.* Will you take for a seatrial?** Best of luck, you seemed to have done your homework...* Just be prepared to keep going if things don't feel/look right; better to waste a weekend Vs a whole boating season.* I always like to ask "why their selling it" and...shut up.* Amazing what you hear.*

[Bruce W]

I would also take a CLOSE look at ALL of the screws in the boat - in the "early years" of "Logic", I think there were considerable problems (according to what I remember seeing on THT?) with them backing out - especially around the console mounting area?

At the same time, I have ALSO seen info on here that that problem was corrected on the "newer" models, as well as very favorable comments from those who own them!

I think 2001 was the FIRST year for Logic and it was one of THE first boats I looked at in my "search".

Sorry I can't comment on the motor.

Regards,

[stripa]

Bruce is right about the screws, check the bow rail and all cleats, T-top etc. Logic used to sell the "powdered plastic", you could heat the screw, dip it and re-install it. The hatches were not the best fitting. Definitely test ride it, it does flexsome, but has a soft ride. Good luck.