I'm thinking about taking a look at mid 80s Bertram with 99-00 Cummins 370s in it.
Owner says that this boat will turn WOT right at 40knots. 2k rpms is 20knot cruise. At first I thought that 20 knots over that extra 1000rpm is too much, but after looking at the spec sheets and a little research I think this is plausible.
Anyone here have any experience with this setup? I know there are a lot of 330s out there.
If everything checks out with surveying and everything, it may be a steal. http://www.cmdmarine.com/Products/Re...6B/fr91260.pdf
Spec sheet is a little newer than the motor, but should be pretty close.