Twin vee hatch missing hatch question - The Hull Truth

kevin9164 · 03-03-2009, 11:58 AM

I have a 17' twinvee with a live well in the rear of the boat. The boat was missing the hatch that covered the livewell. The opening is approximately 13 wide x 30 long. I went to a twinvee dealer and noticed they use alot of th marine stuff.

I purchase a 13x30 hatch from th marine but it is bot not wide or long enough by about 1/2 to 3/4 of an inch.

Does any one have the twinvee with the rear livewell or does any one know what hatch manufacturer they used for their livewell on the 17 twinvee.

CATCH-ALL · 03-04-2009, 08:39 PM

What year was your 17 manufactured?Catch

renagade69 · 03-05-2009, 05:30 AM

Twin Vee makes their own hatches for the live wells that are built in on a table. I have been in the room. Any fiberglass guy can make a hatch.

turbo · 03-05-2009, 06:32 AM

NOt sure where you are, but you can have a nice custom hatch manufacturered out of Starboard or fiberglass. If you are in central Florida, you can try these guys listed below. They have a cnc machine and can make just about anything you want out of starboard, Plexiglas or Lexan.

JW Austin Industries
7713 Ellis Rd.
W. Melbourne, Fl 32904
Phone: 321-723-2422
Fax: 321-728-0239
Email:
austinin@Bellsouth.net

Mon-Fri 7:30am-4:00pm
Steve Austin